
A screen print is built from layers: one screen, one ink, one pass per colour. A design that looks great on a monitor can be expensive, fragile or simply impossible in that process. These are the four decisions that matter most, in the order to make them: the design, the colour, the file and the paper. A last section shows where an AI prompt can help, before and after.
1. Design: think in layers
- Count your colours first. Every colour is another screen, another pass and another chance for the registration to drift. Two to four bold colours is the sweet spot for a first print. A white layer under the colours on a dark shirt counts as one more screen.
- Draw flat shapes. Solid areas print best. For tone, use halftone dots instead of a gradient; a smooth blend has no place on a screen. Avoid soft shadows, glows and semi-transparent effects too: they don’t map to a single ink, so flatten them into a solid or a halftone. The halftone effect shows what a photo turns into.
- Keep lines and type above the limit. Printer guides quote different numbers. As a rule of thumb: about 0.5 pt (0.18 mm) is the thinnest positive line on a fine mesh, closer to 1 pt (0.35 mm) on a shirt, and reversed (knock-out) lines and text need more. Small text is safest bold and sans-serif, around 8 pt or larger on fabric. Ask your printer for their own limits.
- Respect the mesh. A mesh cannot hold a dot smaller than its line frequency allows: about 0.28 mm on a 156 mesh, 0.19 mm on a 230. See the mesh count to LPI chart.
- Plan for drift. No press registers perfectly. Don’t let two colours meet on a hairline: let one run a fraction of a millimetre under the other (overlap, also called trapping; too much shows as a dark halo) or leave a deliberate gap. Add registration marks outside the image (why the marks matter).
- Leave a margin between the artwork and the edge of the stencil, so the squeegee has room to work.
2. Colour: choose the inks, not the screen colours
- Design with the inks you can really print. A monitor is brighter than any ink on paper, so your on-screen colours will look duller in print. Mix a draw-down and look at it in daylight (ink mixing basics).
- Know if your ink is opaque or transparent. Transparent inks on white paper overprint into new colours: yellow under blue gives green from two screens (overprints). Opaque inks cover what is under them.
- Dark paper or fabric needs white first. Semi-transparent inks vanish on dark stock, so print a white layer under them (underbase for dark garments).
- Print order matters. The usual habit is lightest first and darkest last, because light inks pick up pigment from wet dark ones. It is not a law and experienced printers break it, so test. Choose the order before you decide which colour overlaps which.
- Keep colours apart. Two colours that are close in hue and lightness will be hard to separate cleanly. Give each one real contrast.
3. Preparation: a clean file
- Flat artwork: keep it as vector as long as you can and turn text into outlines. Pictures: 300 ppi at the final print size, saved as PNG, not JPEG, because JPEG blurs the edges between colours (see prepare artwork for your mesh).
- Merge and simplify. Remove hidden objects, flatten transparencies and drop effects you cannot print.
- One colour, one layer. Keep every colour on its own layer, labelled. Each ink becomes a black-and-white film. PrintFilmReady does this for you: it sorts the colours into inks, screens the tones as halftone dots at your mesh’s line frequency, mirrors the films for emulsion-down exposure and adds the marks.
- Match the dots to the mesh and avoid moiré (mesh and LPI, screen angles).
4. Paper: decide it before you finish
The same film and the same screen print differently on smooth, rough, coated or dark paper, so decide the paper from the job, then set the mesh and the artwork to suit it. The details are in paper for screen printing, by job and mesh. The short version:
- Bold flats and posters: smooth uncoated cover stock, about 200–300 g/m².
- Fine halftones: the smoothest sheet you can get; a rough surface breaks up small dots.
- Editions: cotton rag paper, softer and permanent. Water-based ink sinks in and looks flatter.
- Coated or gloss: check that the ink bonds, and test.
- The paper white is your lightest colour. A cream sheet tints every ink.
- Paper moves with humidity, more across the grain, which hurts the registration of several colours. Print all colours in one session.
- On fabric, ink spreads more: expect 15 to 35% dot gain on a knit against 3 to 10% on paper, so keep the dots coarser (one design, three surfaces).
5. AI: a prompt before, a check after
An image generator or chat assistant can save time at two moments. Left alone it makes photographic art with soft gradients and hundreds of shades, which is the wrong shape for screen printing, so how you ask matters.
- Before: prompt for the process. Ask for a flat vector illustration or poster style, name the number of colours (match your inks), and ask for solid shapes, thick outlines, high contrast, no gradients or soft shadows, and a plain background. Match the detail to your mesh: bold shapes in 2 or 3 colours for a coarse mesh, soft shading inside the shapes only for a fine one. Example: “A botanical fern illustration, flat vector style, 4 spot colours, clean hard edges between colours, screen print poster art, plain background.” Words that hurt: photorealistic, soft lighting, intricate detail, fine texture. More prompts in AI prompts for screen printing.
- After: check what came out. Export as PNG, upscale to 300 ppi at the final size before you separate, and count the real colours: a “3-colour” prompt often ships with a fourth hiding in an edge or a shadow. Clean up the boundaries in an image editor.
- A second pair of eyes. You can also give your artwork to an AI assistant that reads images and ask it to list the distinct colours, lines or text that look too thin, and shapes that almost touch. Treat the answer as a hint to check yourself, not a measurement: it can miscount, and it knows nothing about your mesh.
- What it cannot know: whether your shapes stay connected for lino, or how far your press drifts. Those checks stay yours.
A checklist before you make the films
- Colours counted, and each one has its own ink
- Lines and text above the limit for your mesh
- Colours that touch have overlap or a deliberate gap
- Dark stock: white layer planned
- File: clean, 300 ppi, PNG
- Paper chosen and tested with the real ink
- AI art: asked for flat colour, and the real colours counted afterwards
Common questions
How many colours should a screen print design have?
As few as the design allows. Each colour is another screen and another pass. Two to four bold colours is a good start; you can get more from fewer screens with transparent overprints and halftones.
How thin can a line be in screen printing?
It depends on the mesh, the ink and the stock. Printer guides quote about 0.5 pt (0.18 mm) as a floor on fine mesh and nearer 1 pt on fabric, with more for reversed lines. Ask your printer, and test.
Can I use gradients?
Not as smooth blends. Turn them into halftone dots, sized to your mesh, so the tone is made by dot size. A tool such as PrintFilmReady does this when it makes the films.
Can I use AI-generated art for screen printing?
Yes, if it separates into a manageable number of flat, contrasting colours. Prompt for a flat illustration or poster style with a stated colour count, then check the real colour count and the resolution before you separate it.
Do I design in RGB or CMYK?
For spot colours, neither matters much: design with flat colours that stand for your inks, and judge the real colour from a printed sample. The screen can only suggest it.
Check your artwork
Load it, set the inks and the mesh and see how it separates and screens before you make a film. Free trial.
Built by a screen printer, for screen printers. What you tell us decides what gets built next. Write a review · Send an idea