
You print yellow, then red and black against its edges. On the film every edge is razor sharp. On the press the screens drift a fraction of a millimetre, and a hair of white paper shows between two colours. The fix is called trapping: let one ink run a little under its neighbour so the drift lands on ink instead of paper. With transparent inks the strip is not a flaw you hide, it is simply another colour.
Why the white line appears
PrintFilmReady gives every pixel of your artwork to exactly one ink, so two neighbouring colours meet at a perfectly clean edge on the films. A press is never that exact: a screen stretches, a frame sits a hair off, a garment shifts on the platen. At 0.1 to 0.5 mm of drift you see a thin white line along every shared edge. An overlap grows one ink a little into the area of the other, so the drift is absorbed.
What the Overlap setting does
- Pick a default for every ink: Off, 0.1, 0.2, 0.3, 0.5, 0.75 or 1 mm.
- Override it per ink in that ink’s own Overlap menu: Default, Off, or a value.
- Choose which inks it runs under with the “Runs under” boxes. By default an ink runs under the inks that print after it. The boxes appear only while the ink has an overlap above zero.
- The overlap only grows into areas of other inks, never onto bare paper, so the outer edge of your design stays exactly where you drew it.
- A halftone keeps its tone inside the overlap zone: it grows as a screen, not as a solid.
- Pro feature, for spot inks (not in CMYK mode). In the free version every ink stops exactly at its neighbour.
The example: yellow under black and red
A poster in three transparent inks. The yellow shapes touch both the red and the black. Print order: red first, yellow second, black last. By default the yellow would run under the black (black prints after it) but not under the red (red printed before it). You want yellow under both.
- Load the artwork and set three inks.
- Leave the default overlap on Off: red and black stay exactly as they are.
- On the yellow ink, set Overlap to 0.3 mm. The “Runs under” row appears.
- Tick red and black.
- Generate the films.
Only the yellow film changes: it grows 0.3 mm into the red and black areas, and nowhere else. Where the yellow meets bare paper, nothing moves.
Why the order is flexible with transparent inks
With opaque inks the ink printed last covers the strip, so you want the lighter ink to run under the darker one, otherwise a light ridge shows on top of the dark. With transparent inks the strip is a mix, and it looks much the same whichever ink prints first. That is why you may tick any other ink, including one that prints before. Print A+B in both orders on your material to be sure; the transparent inks guide has the testing checklist.
How much overlap?
Use the smallest value that hides your drift. Starting points from shop practice, not rules: your press decides, so print a test.
- Paper, fine mesh, tight registration: 0.1 to 0.2 mm.
- Textile, automatic press: 0.2 to 0.3 mm.
- Textile, manual press or stretchy goods: 0.5 mm.
- Large formats or very soft goods: 0.75 to 1 mm.
Mistakes to avoid
- Too much. A wide strip shows as a visible line of mixed colour. Take the smallest value that works.
- Opaque light ink running under dark ink the wrong way round. Let the lighter ink run under the darker one.
- Expecting it to fix paper edges. It never grows onto bare paper, so the outer edge of a shape keeps its registration risk.
- Mixing it up with the underbase. A white underbase has its own choke setting, which shrinks the white. Overlap is the opposite: it grows colour under colour.
Frequently asked questions
What is trapping in screen printing?
Letting one ink run slightly under its neighbour, so a small registration error shows a sliver of overprint instead of a white gap.
Is overlap free?
It is a Pro setting. The free version prints every ink exactly up to its neighbour. See the pricing page.
Does it work in CMYK mode?
No. Overlap is for spot inks; the CMYK mode makes four fixed films without it.
Does it turn my halftones into solids?
No. A halftone keeps its tone in the overlap zone; it grows as a screen.
Which inks should run under which?
By default each ink runs under the inks that print after it. With transparent inks the order matters little, so you can tick any other ink. With opaque inks, let the lighter ink run under the darker one.
How much overlap do I need?
The smallest that hides your drift: about 0.1 to 0.3 mm on paper and automatic presses, 0.5 mm or more on manual textile presses. Print a test.
Try it on your own artwork
Set an ink’s Overlap, tick the inks it should run under and generate. Overlap is part of Pro; the free trial shows what it does.
Built by a screen printer, for screen printers. What you tell us decides what gets built next. Write a review · Send an idea