What an imposition scheme is
A book is not printed one page at a time. Pages are printed several to a large sheet, on both sides, and the sheet is then folded, cut or nested. Imposition is the plan that says which page goes where on each sheet, and which way up. Get it wrong and the pages end up in the wrong order or upside down.
How to use the planner
- Pick the binding. Saddle stitch for staples in the fold, glued for a perfect-bound spine, sewn for signatures stitched with thread.
- Pick the page size and the sheet size. Both are DIN A sizes. The sheet is the paper that goes through your press, risograph or screen: A3 for most riso machines, A2 or A1 for screen printing frames.
- Enter the number of pages. The planner adds blank pages to fill the last sheet.
- Read the diagrams. Every sheet has a front and a back. The number in each cell is the page that goes there. The small arrow shows the top of the page: where it points down, that page is printed upside down so it comes out right after folding. Pink dashed lines are folds.
- Print the plan, or download it as PNG or SVG, or copy the page order as text.
Saddle stitch, glued or sewn
- Saddle stitch is the cheapest and lies flat, but only works up to about 64 pages. Inner sheets stick out when nested, which is why the planner also gives you the creep per sheet.
- Glued (perfect bound) gives a flat spine you can print on. The signatures are folded, gathered, and the spine is milled and glued, so you need a few millimetres of extra margin there.
- Sewn is the sturdiest. Signatures of 8 or 16 pages are sewn through the fold, and the book opens flatter.
Screen printing and risograph
For a printed sheet you need a film, or a master, for every colour on each side of the sheet. The plan tells you what goes on the front and the back; keep the same registration marks on both sides and turn the sheet over the same edge every time. Make the films for each side separately, mirrored for the emulsion side down.
PrintFilmReady makes those films from your artwork: one per ink, with the dot size worked out for your mesh.
Common questions
What is a signature?
A sheet printed on both sides and folded, so its pages come out in the right order. Most books are made of several signatures, usually 8 or 16 pages each.
Why can I only pick A sizes?
DIN A sizes halve exactly: an A3 sheet folded once is A4, folded twice A5. That makes the maths clean and the sheets fold without waste. Other sizes are not supported yet.
How many pages go on one sheet?
For folded signatures it depends on the sizes: A4 pages on an A3 sheet give 4 pages per sheet, A5 pages on A3 give 8, A5 pages on A2 or A6 pages on A3 give 16. The planner shows the number for your choice.
What is creep?
In a saddle-stitched book the folded sheets sit inside each other, so the closer a sheet is to the middle, the further it sticks out at the outer edge. When the book is trimmed, more paper is cut from the inner pages. To keep text and images from ending up too close to the trim, the planner moves the page content a little towards the spine. The correction depends on the paper thickness and the number of sheets.
Is this free? Is anything uploaded?
It is free and runs entirely in your browser. You enter numbers, not files, so nothing is uploaded.
Need films for those sheets?
PrintFilmReady turns artwork into print-ready halftone films, one per ink, with the dot size worked out for your mesh. Free trial.