PrintFilmReady — print instructions

Every film in this ZIP has its sequence (e.g. "2/4"), ink name and
colour burned into the label, plus registration crosshairs (top,
bottom, left, right) and corner crop ticks. Expose one screen per
film and print in the order below, using those crosshairs to line
up each screen on press before locking it off.

Print order:
  1. Ink 1  #8FB0AF
  2. Ink 2  #985033
  3. Ink 3  #B2A490

Paper/relief: let each layer set before registering the next pass —
wet layers will pick up or smear under a second pull.
Films are mirrored — keep every screen in this job exposed and printed the same way round (consistent emulsion side) or registration will drift.

Before the real run: pull a test print on scrap and check registration
and colour before committing production stock.